Categories

Newsletter

More from PRC Industrial Supply

PRC Industrial Supply offers a full range of services including:

  • In-house repairs of pumps, motors, valves and cylinders
  • Hose burst testing to 30,000 PSI
  • Custom power unit design and fabrication
  • Field-trouble shooting and hydraulic system design including incorporation of wireless radio remote controls into existing system

We also provide custom fabrication of hydraulic steel tubing, hydraulic hose and industrial hose assemblies using a wide variety of hose types and fittings configurations.

Learn more at www.prcindustrial.com

Download our equipment and capabilities brochure

Download our line card

Download our terms & conditions of sale

6 Function with IP Transmitter
Click over image to enlarge

6 Function with IP Transmitter

Manufacturer: Lodar
Price: Call for price
Product ID : lodar-92206-8
Weight: 5.00 lbs

Purchase

Call for price

Description

6 Function with IP Transmitter

92 Series - FET System

SYSTEM PART NUMBER

92206 6 Function Receiver with Master + 6 Function IP Transmitter

REPLACEMENT TRANSMITTER

92206TX 6 Function IP Transmitter
92210TX 10 Function IP Transmitter
Contents
  • 1 x Receiver
  • 1 x IP Transmitter
  • 1 x Lanyard
  • 1 x Instructions

IP TRANSMITTER SPECIFICATION

SWITCH

Type Tactile Dome on PCB Keypad

BATTERY

Type 4 x AAA Alkaline Manganese in holder (6 Volts)

INDICATOR

Type 1 x Red LED
Off Transmitter OFF (The STOP Button has been pressed and released)
Slow flash Transmitter ON and ready for use (The SET Button has been pressed and released)
On Transmitting (A STOP, SET or Function Button is being pressed)
Fast flash Transmitting – Indication that the battery will need replacing soon

CURRENT DRAW

Quiescent 15 micro amps
Operating 24 milliamps

PROTECTION

Reverse polarity Protected
IP Rating 67
Registration codes Over 16 million

PERFORMANCE

Temp Range -10o C to + 40o C (13o F to + 104o F)
Range Nominal as supplied 60 metres (200 ft) from the Receiver, when driving a momentary output without signal drop out
Transmitted power 1 mW Typical

COMPLIANCE

EMC 2004/104/EEC Exceeds ETSI 300 220 Compliant E11 10R-037601
Modulation FM
Frequencies 418.00 MHz F1D USA (optional UK)
  433.92 MHz F1D World wide (optional USA)

RECEIVER SPECIFICATION

SWITCH TYPE

Output Switching MOS Field Effect Transistor (P Channel Power MOSFET)

SUPPLY VOLTS

Nominal 12/24 Volts DC
Absolute Maximum 40 Volts DC
Minimum 8 Volts DC
Output Switch Supply Internal 12/24 Volts

AMPS

FET Rating 15 Amps
System Rating 15 Amps
Quiescent Current 25 mA on Standby (Not SET)
Overload Protection 15 Amps (Auto Shutdown)

AERIAL

Internal Antenna Yes Supplied and fitted
External Antenna Optional See Accessories.

OUTPUTS

Master 1 Can be Parallel or Continuous
Function 6  
Master (Secondary) 1 Continuous

CONFIGURATION

RS232 Programming to users' requirements Yes Not all models, see Build Specification Table. For programming interlocks, push/push latch, parallel master inhibit, timeout, channel timeout delay, master on delay, radio button de-latching and output allocation

PERFORMANCE

Simultaneous Outputs Yes With horizontal interlocks (Interlocks are programmable – see CONFIGURATION above)
Instant TX response Yes No perceivable delay between TX operation and RX action

DIAGNOSTICS

LED's Yes Confirm 5 Volts, SET, Fault and all Outputs.

PROTECTION

ESR Safety Yes See ESR Safety document
Back EMF Yes  
Registration codes   Over 16 million
STOP Connection Yes Internal Emergency Stop Connection

WIRING

Wiring Loom Yes 3 metres (10ft) supplied and fitted
Cable Gland Yes Supplied and fitted
Connections Screw terminal into plug and socket on PCB, for easy “swap out”

ENCLOSURE

Weight 0.3 lbs (335gms)
Lid Clear PVC - to view LEDs
Base Black PVC
Breather Gortex fitted in base
Mounting 4 external lugs
Fixings 5mm (3/16") not supplied
IP Rating Performs to IP67 standard
(0.5 metre water for 1 hour)

See PDF for complete specifications